Bug Feedback for the Software Function-讨论TURMO-3.5Inch-TURMO

评分

只看作者

最新最热

- xdominhd0
  I tried everything but program is broken and dev is sleeping
  13小时前回复
- xdominhd0
  Can someone help me with FPS function? RTSS is installed and runnning but turmo but in turmo is not working
  17小时前回复
- xdominhd0
  Fps stoped working
  昨天回复
- Chicko1
  Anyone else have or had this problem ?!?
  7天前回复
- Cypher4410
  cant install software. As per attachment been sitting here for 2hrs wont move. Tried both versions and neither will go past this point.
  8天前回复
- - turmo作者超级版主0
    Hello, could you please tell me your computer system model, system bit version (32-bit or 64-bit), and system language?
    7天前@Cypher441回复
  - - Cypher4410
      Windows 11 Pro 25H2 . 64bit, english.
      7天前@turmo
- johnyboy0
  Hi, on version Beta Version5.3.14 the volume sometime is misscalculated with 1 point difference from windows number. In Stable Version5.3.10 all is ok.
  11天前回复
- - turmo作者超级版主1
    hello,5.3.16 --Resolved the volume difference discrepancy problem THX
    3天前@johnyboy回复
- - turmo作者超级版主0
    Version 5.3.14 uses a new audio interface, which is compatible with more audio signals!
    7天前@johnyboy回复
- Link Koriri0
  When plugging in device to any port on PC, the unit (3.5 inch Secondary Display) turns on but stays with a white display, and not being detected by software, continues to say "Disconnected". Troubleshooting steps taken: - Plugged in using included cable into multiple USB Ports (Front and back of PC) - Plugged in using personal cable into multiple USB Ports (Front and back of PC) - Rebooted PC Multiple times while having display plugged in - Plugged in unit while Turmo application is running or closed - Run Turmo as Admin - I've attempted to locate the device in Device Manager, but cannot seem to find it to attempt a driver update. Some notes: - PC does chime stating that it does detect something has been plugged into the PC - Running Windows 11, version 25H2 - GPU is MSI RTX 5070ti - Motherboard is Gigabyte X670 AORUS ELITE RX
  14天前回复
- - turmo作者超级版主0
    https://turmo.org/?post_type=forum_post&p=441
    11天前@Link Koriri回复
- foo57640
  not only show info for ram have 2 sticks or 4 sticks in total ram but also show the ram temperature
  15天前回复
- - turmo作者超级版主0
    Hello, I will pass the information along. Thank you! There shouldn’t be a temperature sensor on the RAM, should there?
    7天前@foo5764回复
- MNevaen0
  RAM shows only 1 stick and wrong speed.I have 6000MHz 2x16G Kingston Fury Beast Also It doesnt show GPU RAM USAGE. Radeon RX 7900 XT
  15天前回复
- Montu0
  Windows 11 pro version 5.3.14 5" screen GPU 5070 TI It does not display the GPU Load information; it always shows 0%. The remaining information (temperature, used, fan) is displayed normally.
  16天前回复
- - turmo作者超级版主0
    You can click on "theme parameter" to adjust the current theme parameters for GPU load, or use "parameter" to change all basic default settings.
    16天前@Montu回复
- rwmaios800
  windows 11 version 5.3.14 problem with t.he seconds of the time.sometimes goes with two seconds sometimes with one second
  16天前回复
- - turmo作者超级版主0
    Hello! Rendering images takes time, especially when there are many parameters being updated, which requires even more time.
    16天前@rwmaios80回复
- Angrysausagedog0
  Latest version just disconnects from the port after a few minutes Windows 11 5" screen, Version 5.3.12 Plug it in, it connects, minutes later it disconnects and stops sending data, pretty much infinitely repeatable, doesn't matter which port or cable used. Another issue being that it disconnects if you attempt to flip 0/180 with certain themes. And the issue of it not being detected when starting up windows and needing to unplug/plug each time you boot up before it is recognised is also still there. The screen has been pretty much unusable since I got it, patience is wearing pretty thin now to be honest. I feel at this point it would be better to enable the function that lets us use it as an extended monitor so we can just use aida64 as if it was just a small monitor.
  17天前回复
- Baltazar2009PL0
  Witam, kolejny problem - program widzi tylko 8GB RAM z 24, nie potrafi zczytać całości tylko analizuje jedną kość - bez sensu. Coś co było dobre spartoliliście. Jest takie powiedzenie: NOWE jest WROGIEM starego (czyli lepszego).
  18天前回复
- - turmo作者超级版主0
    Hello! Are you referring to the total memory size shown in the text? Please check if the parameters related to them parameter have been set to use virtual memory.
    18天前@Baltazar2009PL回复
- Baltazar2009PL0
  Witam. Nie naprawiliście problemu z datą: Sam program w porównaniu do poprzedniego jest beznadziejny. Tekst się nie mieści w polach, nie da się nic przesunąć, źle rozplanowana przestrzeń.
  18天前回复
- - turmo作者超级版主0
    Hello! If you're updating by overwriting files with the latest version, please follow these steps: 1. Close the application in the background. 2. Delete the config folder inside the software's data directory. 3. Restart the application.
    18天前@Baltazar2009PL回复
- CERIM0
  Hi! For me FPS counter doesnt work at all. I tried also installing RivaTuner from MSI but still there is no way to connect any parameter with FPS. Is this implemented yet?
  23天前回复
- - turmo作者超级版主2
    Hello! The FPS function based on RTSS has been added. Please download the update; the tutorial is included in the package. Thank you!
    18天前@CERIM回复
  - - OkamiGT0
      El contador de FPS sirve bien, pero si en un juego se activa el Frame generation el contador se vuelve loco y sube a mas de 1000 fps. Espero te sirva esta información y tenga alguna solución.
      15天前@turmo
  - - CERIM0
      Hi! Nice, I have just tested it out and it works perfectly! Thanks for quick development. I will probably user your products in future 🙂 Keep up the good work.
      17天前@turmo
- - turmo作者超级版主1
    Hello! Issues related to FPS and other related problems will be resolved in the coming weeks. Thank you!
    22天前@CERIM回复
- Dartaroth0
  Calendar Spain display. DD/MM/YYYY Day / moth / year not avalaible
  24天前回复
- - turmo作者超级版主0
    Hello! Version 5.3.11 is now available!
    20天前@Dartaroth回复
- johnyboy0
  In the last version 5.3.10, sensor are wrong or unusable Where can i downlad old versions?
  26天前回复
- - turmo作者超级版主0
    Hello! Could you let me know which version you require, and which specific parameters are problematic?
    25天前@johnyboy回复
  - - johnyboy0
      Hello again. I fix the problem it was my fault. I copy the current version over old one and this is the cause of not working correct the sensors. Now i put only the new version and my theme and it is ok. You can put a warning in the instruction to erase old configuration/directory
      24天前@turmo
  - - johnyboy1
      Hi, network upload and download are stayng 100% Graphix one.
      25天前@turmo
- Rhylock0
  Hello. TURMO Turning 3.5 inch IPS Panel. PC03501B (White). Dual GPU, the GPU utilization does not work for Dual GPU (2 GPUS), it only detects one and not the other. GPU label (name detects both GPUs thou). RX6600 is detected but my 3070 is not detected under GPU usage.
  26天前回复
- - turmo作者超级版主1
    Hi there! You can now go to the "parameter" section to modify the 15 required parameters for the "theme parameter" configuration.
    25天前@Rhylock回复
  - - Rhylock0
      I will try that, thank you
      25天前@turmo
- xdominhd0
  You can also add gpu fan in %
  27天前回复
- - turmo作者超级版主0
    Hi,Great idea! But what's a good maximum fan speed to set? Should it be dynamic?
    26天前@xdominhd回复
  - - xdominhd0
      % of the maximum of the gpu model, like the hwinfo or msi afterburner does
      26天前@turmo
- xdominhd0
  Volume load is on 100% and can't be assign to certain audio device
  27天前回复
- - turmo作者超级版主0
    Hello! You can try checking here – it should be outputting to the wrong device by default, as there are usually multiple audio output devices on a computer. We'll arrange for the technical team to fix this issue in the follow-up!
    26天前@xdominhd回复
- - turmo作者超级版主0
    Hello! The default audio volume should be for the speakers. You can check the audio mixer settings for this. We will fix this bug in a subsequent update! Thank you!
    26天前@xdominhd回复
  - - xdominhd0
      I check audio mixer. only one devices on my pc
      26天前@turmo
- xdominhd1
  RTX 5080 win10, memory clock and usage used and free are wrong. Also FPS counter not working showing 0Hz.
  27天前回复
- - turmo作者超级版主0
    Hello! The information has been forwarded to the technical team. Thank you!
    26天前@xdominhd回复
- - turmo作者超级版主0
    Hello! You can try the following steps: 1. Close the app from the background 2. Delete the config.at file in the app folder 3. Restart the app 4. Check if the issue still exists 5. If it no longer appears, modify the parameters containing “GPU” via “Them Parameter”! Thank you!
    26天前@xdominhd回复
  - - xdominhd0
      Deleted config.at but problem still appears look at image. My gpu is 16gb
      26天前@turmo
- kipo0
  Hi, sorry I'm new one here and just start using Turmo and I didn't found that anyone post problems with hdd. In my computer I have two sdd drives and one hdd and when i start theme my hdd wake up from sleep and start then noise come from hdd so I start looking around how to remove/block hdd because theme didn't use any disk information and didn't found way to to this in app. Does anyone else have the same issue or know how to fix this? I found 3 Json files in date folder and found all disks but i do not want to edit them manually for now.
  28天前回复
- - turmo作者超级版主1
    This issue has been fixed in version 5.3.10 – feel free to test it out! The system will not retrieve any data (e.g., C drive info) as long as the theme does not require it. Thank you!
    26天前@kipo回复
  - - kipo0
      Thank for fast response but issue still exist when screen update is running but I found solution for this in firewall just deny Perform low-level access to disk and that solve hdd click and application work normal. Perform low-level access to file system is allowed. I hope that this information will help you to solve this problem.
      26天前@turmo
- - turmo作者超级版主1
    Hi! We'll fix this later, and no hard drive info will be used or accessed.
    28天前江西省赣州市@kipo回复
- Juan Ramos0
  "Hi, I want to tell you that my screen flickers or blinks. I have Windows 11, and when I test it on another Windows, like Windows 10, that doesn’t happen. But on my Windows 11, I have the problem that the screen flickers.
  31天前回复
- - turmo作者超级版主0
    Hello! Flickering issue? Could it be a poor contact problem with the USB power supply?
    30天前江西省赣州市@Juan Ramos回复
  - - Juan Ramos0
      Well, the USB port works fine.
      30天前@turmo
- Angrysausagedog0
  My screen does not display at all when I turn on my PC, I am forced to unplug and re-plug it back in in order for the software to detect the screen is plugged in and begin displaying stats Windows 11 set to startup with windows plugged in via USB C cable
  31天前回复
- - turmo作者超级版主0
    Hello, is this the 5-inch secondary screen? If it is, I'll proceed to fix the related bug. Thank you!
    31天前江西省赣州市@Angrysausagedog回复
  - - Troyota0
      Hi, I also have the same problem, 5 inch screen. Every time I shut down and turn on PC, it doesn't turn on/screen stays black and the Turmo software doesn't detect it. Have to unplug and replug it in again for it to work. Hope this can be fixed. Thank you!
      9天前@turmo
  - - Angrysausagedog0
      Yes, sorry.. It is the 5 inch screen.
      31天前@turmo
- ChrisO1
  Mine does not display any GPU information, it just stays at 0
  31天前回复
- - turmo作者超级版主0
    If you are directly overwriting the previous files, please delete the config.at file located in the software's date folder. Failing to do so may prevent the software from reading the new configuration correctly. 1.close the application 2.delete data/ config.at 3.restart the application 4.You can configure and select your desired GPU here.
    31天前江西省赣州市@ChrisO回复
- Foncday0
  I can't install the software. it not respond in the middle of the install. Im on win 11 Finally worked... i don't know what happened
  1个月前回复
- - turmo作者超级版主0
    Hello! This software is portable and requires no installation. Simply download the package, extract the files to a folder, and double-click turmo.exe to launch it directly.
    1个月前江西省赣州市@Foncday回复
  - - Foncday0
      Thank you for the answer. Yes i got it too late that it was portable. But the problem was remaining, it's wasnt "instalation" but it was stuck in the loading. . Anyway it's seem alright actually. Thank you
      1个月前@turmo